Back to Location Module
Roadway Components - RURAL 7
Updated May 06, 2016
This article applies to:
- RoadEng Civil
- RoadEng Forestry
Widths of ACP, Base and Subbase are explicitly set.
Typical Cross Section
Default Material Assignments
Parameters
ACPThick | Thickness of ACP Layer |
ACPFillSlope | FillSlope of ACP layer |
ACPWidth | Width of ACP surface |
BaseThick | Thickness of base material. |
BaseWidth | Width of base layer. |
BaseFillSlope | Fill slope for base layer. |
SubbaseThick | Thickness of subbase material. |
SubbaseWidth | Width of the top of the sub base. |
SubbaseFilllSlope | Fill slope of subbase material. |
SubgradeWidth | Subgrade width. |
SubgradeSlope | Slope of subgrade. |
SubgradeExtWitdh | Subgrade extension width. |
SubGradeExtSlope | Subgrade extension slope. |
_SUPER | Superelevation or crown |