Back to Location Module
Roadway Components - RURAL 4
Updated May 06, 2016
This article applies to:
- RoadEng Civil
- RoadEng Forestry
Rural paved road with 3 layers and shoulders.
Typical Cross Section
Default Material Assignments
Parameters
| AcpWidth | Surfacing or lane width, for pavement layer. |
| AcpThick | Thickness of pavement surface. |
| AcpFillSlope | Pavement surface slope (usually vertical). |
| BaseThick | Thickness of layer. |
| BaseFillSlope | Fill slope for base layer. |
| BaseWidth | Width of base layer. |
| ShoulderGravWidth | Width of shoulder. |
| ShoulderGravSlope | Slope of shoulder (super elevation of crown slope is added to this value if bShoulderSuper is set). |
| bShoulderGravSuper | Set to 1 to include super/crown in the shoulder slope, 0 otherwise. |
| OutsideFillSlope | Fill slope of sholder. |
| _SUPER | Superelevation or crown |