Back to Location Module
Roadway Components - RESOURCE 1
Updated February 16, 2024
This article applies to:
- RoadEng Civil
- RoadEng Forestry
Rural I :
Up to two layers above subgrade and a seperate shoulder layer in addition to the road width.
Typical Cross Section
Parameters
| Width | |
| Srf2Width | Width for top layer of running surface. |
| Srf2Thick | Thickness of surface 2 layer. |
| Srf1Thick | Thickness of surface 1 layer. |
| Srf1FillSlope | Fill slope for surface 1 layer. |
| bAlignAtTop | Set to 1 for profile defined at top surface. Set to 0 for profile at sub-grade. |
| DaylightDist | Daylight distance applied in cut situations to close horizontally to ground. |