Back to Location Module
Roadway Components - Resource 1
Updated October 06, 2022
This article applies to:
- RoadEng Civil
- RoadEng Forestry
Resource I :
Up to three layer template with pavement inset optional paved and non-paved shoulder.
Typical Cross Section
Default Material Assignments
Parameters
| Width | Surfacing or lane width, for top layer. |
| Srf2Thick | Surface 2 thickness |
| Srf2FillSlope | Fill slope % for surface 2 |
| Srf1Thick | Surface 1 thickness |
| Srf1FillSlope | Fill slope % for surface 1 |
| bAlignAtTop | Set to 1 for profile defined at top surface. Set to 0 for profile at sub-grade. |
| DaylightDist | Daylight distance applied in cut situations to close horizontally to ground. |