Back to Location Module
Roadway Components - LANE
Updated May 06, 2016
This article applies to:
- RoadEng Civil
- RoadEng Forestry
Up to three layer roadway.
Typical Cros Section
Default Material Assignments
Parameters
| AcpThick | Thickness of pavement surface. | |
| AcpWidth | Width of lane (horizontal distance). | |
| BaseThick | Thickness of base layer. | |
| SubbaseThick | Thickness of subbase layer. | |
| bApplySuper | Set to 1 to apply super. | |
| LaneSlope | Slope of lane. Super is added to this. | |
| _SUPER | Superelevation or crown |