Back to Location Module
Roadway Components - RURAL 2
Updated May 06, 2016
This article applies to:
- RoadEng Civil
- RoadEng Forestry
Rural II : Rural road with 1 raised layer of surfacing above a base layer.
Typical Cross Section
Default Material Assignments
Parameters
| AcpWidth | Surfacing or lane width, for pavement layer. |
| AcpThick | Thickness of pavement surface. |
| AcpFillSlope | Pavement surface sloppuree (usually vertical). |
| BaseThick | Thickness of layer. |
| ShoulderGravWidth | Width of gravel shoulder. |
| ShoulderGravSlope | Slope of gravel shoulder. Crown or super is added to this slope if bShoulderGravSlope is set to 1. |
| bShoulderGravSuper | Set to 1 to apply super to shoulder. |
| _SUPER | Superelevation or crown. |