Back to Location Module
Penstock 1 - Basic
Updated May 09, 2016
This article applies to:
- RoadEng Civil
- RoadEng Forestry
This component is part of a 2 component set consisting of a road side and non road side.
Typical Cross Section
Parameters
| Pipe_Diameter | Pipe Diameter | |
| PBMD | Pipe Bedding Material Depth (beneath the penstock to bottom of trench) | |
| Trench_BW | Half the trench bottom width. | |
| Trench_CSS | Cut slope. | |
| SFCD | Select fill cover depth. | |
| SFSS | Select fill side slope. | |
| SFTW | Select fill minimum top width. | |
| CFCD | Common fill cover depth. | |
| CFSS | Common fill side slopes. | |
| CFTW | Common fill top width. | |
| CF_top_slope | Slope of common to encourage runoff. | |
| Bank_width | Bank width (if in fill) | |
| Bank_fill_SS | Outside slope of bank | |
| road_offset | vertical dist from road to Centerline of pipe | |
| RoadSlope | Slope of road for drainage. |