Back to Location Module
Windrow Pile
Updated July 27, 2022
This article applies to:
- RoadEng Civil
- RoadEng Forestry
This component will vertically tie the top of a windrow to a feature. The connection point is the toe of the inside slope.
Typical Cross Section
Parameters
| WindrowSlp | Windrow slope. | |
| WindrowHeight | Vertical distance to top of windrow measured from the centerline. | |
| WindrowTopWd | Width of Windrow top. | |
| bExcludeWindrow | Set to 1 to exclude the windrow. This parameter can be overridden. |