Knowledge Base

Back to Location Module

Ditches and Subcuts - DITCH 4

Updated May 06, 2016

This article applies to:
  • RoadEng Civil
  • RoadEng Forestry

Horizontal and Vertical Tie

This component will attach a ditch component to a feature horizontally and vertically.

Typical Cross Section


DitchVertOffsetVertical offset from the C/L to ditch inside bottom.
DitchHorzOffsetDitch horizontal offset from CL to ditch inside bottom.
DitchBotWdWidth of the bottom of the ditch (horizontal distance).
DitchBotSlpBottom of the ditch slope.
DitchDepthDepth of the ditch measured from attachment point.
bExcludeDitchSet to 1 to exclude the ditch. This parameter can be overriden.