Back to Location Module
Bridge 5 - Girders
Updated May 09, 2016
This article applies to:
- RoadEng Civil
- RoadEng Forestry
Bridge deck with girders and optional sidewalk.
Typical Cross Section
Parameters
| DeckWidth | Total deck width including curb and sidewalk | |
| DeckEdgeDepth | Edge of deck depth. | |
| DeckOverhangWidth | Width of overhang. | |
| DeckOverhangSlope | Slope of the overhang | |
| GirderSideSlope | Slope from bottom of overhang to base. | |
| StructDepth | Total depth to bottom of bridge structure. | |
| StructBottomSlope | Slope of the bottom of the structure (super is added to this value). | |
| bIncludeSidewalk | Set to 1 to include a sidewalk. | |
| SidewalkWidth | Sidewalk width (must be less than SidewalkTotalWidth) | |
| SidewalkHeight | Height of inside of sidewalk | |
| SidewalkSlope | Sidewalk slope (super elevation or crown is added to this value) | |
| SidewalkTotalWidth | Sidewalk width including curb. | |
| CurbInsideHeight | Height of curb above the sidewalk. |