Knowledge Base

Back to Videos


Video: Calculating As-Built Volumes (Part 2): Road Volumes for Multiple Layers

Updated July 03, 2025


This article applies to:
  • RoadEng Civil

This video is a follow-up to our introduction on calculating as-built quantities in RoadEng. Last time, we focused on volumes between two surfaces, original ground and subgrade. Now, we take it further by adding multiple layers like stripping surfaces and pavement structures to get more detailed volume calculations. Watch the full series:

Part 1 -    • Calculating As-Built Volumes 3 Ways  
Part 3 -    • Calculating As-Built Volumes (Part 3): Vis...