Knowledge Base

Back to Location Module


Shifting Vertical Alignments

Updated January 02, 2020


This article applies to:
  • Terrain Forestry
  • RoadEng Civil
  • RoadEng Forestry

Shifting Vertical Alignments

Note: this example was completed by using Location Version 9.

In Location module, it is possible to change the elevation for the vertical alignment. 

Corridor| Operations | Transformations | Rotate/Translate/Scale

Capture_1.PNG

Set the Z offset to 0.5 m.

Capture_2.PNG

The vertical alignment will be raised by 0.5 m. The result should be something similar to this:

                                 Capture_3.PNG